RT-680 Firestop coating for metal structures

RT-680 Firestop coating for metal structures

Universal solution for fire protection of supporting steel structures and ventilation ducts

Applications and advantages:

•Creating fireproof coatings of the bloating type providing the required fire resistance limit of the supporting elements

•Fire protection of ducts

•No mesh reinforcement required

•For buildings of category I and II

•Suitable for all ground compositions

•One component, ready to use

TECHNICAL SPECIFICATIONS

Color

Total volume / filling / composition output

Fire resistance limit:
– for pipeline and air duct penetrations
– for cable penetrations

Scope of supply

Application equipment

Setting time

Recommended service life

Shelf life

Manufacturer

Country of Origin

Red / Gray

450 ml / 430 ml / 4.9 liters*

240 minutes
180 minutes

Composition cartridge, 2 mixers

RT-01D dispensing device

35 seconds

30 years

12 months

Rock Tech FZC

UAE

*For more information, refer to the TDS

NAME	PCS	ITEM NO.
RT-01 two-component fire-fighting thermally expanding composition, 430 ml	1	250053
RT-01D dispensing device	1	250050
RT-620-M additional spout-mixer	1	250011

Pos.	Designation	Name
1	part No. 250050	RT-01 two-component fire-fighting thermal expanding composition
2	part No. 250053	RT-01D dispensing device
3	part No. 250012	RT-M marking plate Sleeves

DN, mm	Depth of firestop sealing, mm	Volume, L	Quantity of cartridges, pcs
50	50	50	50
80	80	80	80
80	80	80	80
80	80	80	80
50	50	50	50

* The total thickness of the penetration filling with fire protection material must be at least 80 mm for IET60 or 200 mm for IET150 (on either side of the penetration). If the penetration is filled on both sides, the thickness of each part must be at least 40 or 100 mm, respectively * The total cross-sectional area of the cable must not exceed 60% of the penetration area (i.e. RT-01 equals 40% or more of the penetration area). * It is allowed to install the following basic materials in the walls and floors: concrete, brick, gas silicate block, sandwich panel, fireproof gypsum board with the rated limit of fire resistance.

Pos.	Designation	Name
1	part No. 250050	RT-01 two-component fire-fighting thermal expanding composition
2	part No. 250053	RT-01D dispensing device
3	part No. 250012	RT-M marking plate Sleeves

DN, mm	Depth of firestop sealing, mm	Volume, L	Quantity of cartridges, pcs
50	50	50	50
80	80	80	80
80	80	80	80
80	80	80	80
50	50	50	50

* The total thickness of the penetration filling with fire protection material must be at least 80 mm for IET60 or 200 mm for IET150 (on either side of the penetration). If the penetration is filled on both sides, the thickness of each part must be at least 40 or 100 mm, respectively * The total cross-sectional area of the cable must not exceed 60% of the penetration area (i.e. RT-01 equals 40% or more of the penetration area). * It is allowed to install the following basic materials in the walls and floors: concrete, brick, gas silicate block, sandwich panel, fireproof gypsum board with the rated limit of fire resistance.

Pos.	Designation	Name
1	part No. 250050	RT-01 two-component fire-fighting thermal expanding composition
2	part No. 250053	RT-01D dispensing device
3	part No. 250012	RT-M marking plate Sleeves

DN, mm	Depth of firestop sealing, mm	Volume, L	Quantity of cartridges, pcs
50	50	50	50
80	80	80	80
80	80	80	80
80	80	80	80
50	50	50	50

* The total thickness of the penetration filling with fire protection material must be at least 80 mm for IET60 or 200 mm for IET150 (on either side of the penetration). If the penetration is filled on both sides, the thickness of each part must be at least 40 or 100 mm, respectively * The total cross-sectional area of the cable must not exceed 60% of the penetration area (i.e. RT-01 equals 40% or more of the penetration area). * It is allowed to install the following basic materials in the walls and floors: concrete, brick, gas silicate block, sandwich panel, fireproof gypsum board with the rated limit of fire resistance.

Pos.	Designation	Name
1	part No. 250050	RT-01 two-component fire-fighting thermal expanding composition
2	part No. 250053	RT-01D dispensing device
3	part No. 250012	RT-M marking plate Sleeves

DN, mm	Depth of firestop sealing, mm	Volume, L	Quantity of cartridges, pcs
50	50	50	50
80	80	80	80
80	80	80	80
80	80	80	80
50	50	50	50

* The total thickness of the penetration filling with fire protection material must be at least 80 mm for IET60 or 200 mm for IET150 (on either side of the penetration). If the penetration is filled on both sides, the thickness of each part must be at least 40 or 100 mm, respectively * The total cross-sectional area of the cable must not exceed 60% of the penetration area (i.e. RT-01 equals 40% or more of the penetration area). * It is allowed to install the following basic materials in the walls and floors: concrete, brick, gas silicate block, sandwich panel, fireproof gypsum board with the rated limit of fire resistance.

Pos.	Designation	Name
1	part No. 250050	RT-01 two-component fire-fighting thermal expanding composition
2	part No. 250053	RT-01D dispensing device
3	part No. 250012	RT-M marking plate Sleeves

DN, mm	Depth of firestop sealing, mm	Volume, L	Quantity of cartridges, pcs
50	50	50	50
80	80	80	80
80	80	80	80
80	80	80	80
50	50	50	50

* The total thickness of the penetration filling with fire protection material must be at least 80 mm for IET60 or 200 mm for IET150 (on either side of the penetration). If the penetration is filled on both sides, the thickness of each part must be at least 40 or 100 mm, respectively * The total cross-sectional area of the cable must not exceed 60% of the penetration area (i.e. RT-01 equals 40% or more of the penetration area). * It is allowed to install the following basic materials in the walls and floors: concrete, brick, gas silicate block, sandwich panel, fireproof gypsum board with the rated limit of fire resistance.

Have any questions?
Contact us!